GrayHawk 100 Series Beam Clamp #130-102S
1/4” rod sizes.
Cold rolled steel with a hardened cup point set screw.
Wire seal plating ASTM2833/Magni565
Specify 130-102S GrayHawk
Torque Value = 35 in-lbs
When a torque wrench is not available, the setscrew should be tightened so it contacts the sloped side of the I-beam and then add an additional 1/2 to full turn.
Made in U.S.A. Patent Pending.
|Max. Recommended Load||100 lbs.|
UL Listed for US and Canada
Recommended for attaching 1/4″ hanger rod, bridle ring or conduit clamps to T-Bar and I-beams.
Finishes available for both indoor and outdoor installation.
TO PLACE AN ORDER PLEASE CONTACT OUR EXPERIENCED AND PROFESSIONAL CUSTOMER SERVICE TEAM:
- PHONE: 216-362-6300
- EMAIL: firstname.lastname@example.org
If you cannot find what you need or require a custom part, simply call and speak to one of our knowledgeable electrical products experts. They will be able to walk you through the ordering process quickly and professionally.