GrayHawk 130 Series Beam Clamp #130-102S
SIZE RANGE:
1/4” rod sizes.
MATERIAL:
Cold rolled steel with a hardened cup point set screw.
FINISH:
Wire seal plating ASTM2833/Magni565
ORDERING:
Specify 130-102S GrayHawk
INSTALLATION:
Torque Value = 35 in-lbs
When a torque wrench is not available, the setscrew should be tightened so it contacts the sloped side of the I-beam and then add an additional 1/2 to full turn.
Made in U.S.A. Patent Pending.:
Compatible Industries:
Mechanical
New Commercial Construction
HVAC
Refrigeration
Power Generation
| A | .25 inch |
| B | .81 inch |
| C | 1.36 inch |
| D | .66 inch |
| E | .36 inch |
| F | .75 inch |
| G | .75 inch |
| H | .50 inch |
| I | .63 inch |
| J | 1.13 inch |
| K | 1/4-20 |
| Max. Recommended Load | 100 lbs. |
UL Listed for US and Canada
Recommended for attaching 1/4″ hanger rod, bridle ring or conduit clamps to T-Bar and I-beams.
Finishes available for both indoor and outdoor installation.
Ordering Information
TO PLACE AN ORDER PLEASE CONTACT OUR EXPERIENCED AND PROFESSIONAL CUSTOMER SERVICE TEAM:
- PHONE: 216-362-6300
- EMAIL: [email protected]
CLICK TO SUBMIT AN ITEMIZED RFQ
If you cannot find what you need or require a custom part, simply call and speak to one of our knowledgeable electrical products experts. They will be able to walk you through the ordering process quickly and professionally.
