SilverHawk 100 Series Top Beam Clamp #103- 101S
3/8” rod sizes.
Cold rolled steel with a plated hardened cup point set screw and lock nut.
Specify 103-101S SilverHawk
Must install in an upright position.
Torque Value = 60 in-lbs
When a torque wrench is not available, the setscrew should be tightened so it contacts the I-beam and then add an additional 1/4 to 1/2 turn.
Made in U.S.A. Patent Pending.
New Commercial Construction
|B||1 3/16 inches|
|C||1 5/8 inches|
|F||3/8 inch (min.)|
|Max. Recommended Load||400 lbs.|
UL Listed for top of Beam. FM Approved for NFPA 13, maximum rated pipe size. Complies with Manufacturers Standardization Society SP-69 (Type 19 & 23), and federal specification WW-H-171E.
Recommended for attaching hanger rod to top or bottom flange of a beam or bar joist, where the thickness of a joist or flange does not exceed 3/4 inch. The open back design permits rod adjustment and visual
verification during installation.
TO PLACE AN ORDER PLEASE CONTACT OUR EXPERIENCED AND PROFESSIONAL CUSTOMER SERVICE TEAM:
- PHONE: 216-362-6300
- EMAIL: firstname.lastname@example.org
If you cannot find what you need or require a custom part, simply call and speak to one of our knowledgeable pipe hanger experts. They will be able to walk you through the ordering process quickly and professionally.