SilverHawk 103 Series Top Beam Clamp #103- 101S
3/8” rod sizes.
Cold rolled steel with a plated hardened cup point set screw and lock nut.
Electro-plated zinc
Specify 103-101S SilverHawk
Must install in an upright position.
Torque Value = 60 in-lbs
When a torque wrench is not available, the setscrew should be tightened so it contacts the I-beam and then add an additional 1/4 to 1/2 turn.
Compatible Industries:
Fire Protection
Mechanical
Commercial Plumbing
New Commercial Construction
HVAC
Refrigeration
Water Works
Power Generation
| A | 3/8 inch |
| B | 1 3/16 inches |
| C | 1 5/8 inches |
| D | 17/32 inches |
| E | 3/4 inch |
| F | 3/8 inch (min.) |
| G | 15/16 inches |
| Approx. Weight per 100 (pcs.) | 20 lbs. |
| Max. Recommended Load | 400 lbs. |
| Carton Quantity | 100 |
UL Listed for top of Beam. FM Approved for NFPA 13, maximum rated pipe size. Complies with Manufacturers Standardization Society SP-69 (Type 19 & 23), and federal specification WW-H-171E.
Recommended for attaching hanger rod to top or bottom flange of a beam or bar joist, where the thickness of a joist or flange does not exceed 3/4 inch. The open back design permits rod adjustment and visual
verification during installation.
Ordering Information
TO PLACE AN ORDER PLEASE CONTACT OUR EXPERIENCED AND PROFESSIONAL CUSTOMER SERVICE TEAM:
- PHONE: 216-362-6300
- EMAIL: [email protected]
CLICK TO SUBMIT AN ITEMIZED RFQ
If you cannot find what you need or require a custom part, simply call and speak to one of our knowledgeable pipe hanger experts. They will be able to walk you through the ordering process quickly and professionally.
